BD118
These simple application boards from Radiometrix use firmware based on their familiar CTA88 remote control systems to implement a bi-directional control link. A system consists of a master board (which initiates communication burst cycles) and a slave (which responds to them). In hardware terms these boards are the same, but have different firmware loaded.
Features
- 8 bit address select switch
- A relay to control mains powered devices rated up to 8A, 240VAC
- Visual LED indication of communication status and relay state
- Useful for RF module range testing
- Logic or Switch input for momentary control of relay
- Very low (1mA) average current. 2 years operating life from D cells
- Simple “plug-and-play” setup. No complex programming needed
Applications
- Security and Alarm systems
- Emergency assistance call system
- Status reporting and monitoring systems
- RF Remote control systems
- Industrial controls
- HVAC controls
- Simple On/Off switching
- Long range telecontrol with Narrow Band FM radios
BD118 Application Boards - iot Projects @ Secure2000 UK